Skip to content

💼 Org-Bypass 🤫

An open-source initiative to bypass some of the unnecessary stupid restrictions or monitoring implementations on your work computer.

Note: We do not encourage to do illegal things which might cause security voilations. Use this at your own risk!

🕥 Bypass Time Tracking

Your corporate device may track mouse movement or keyboard inputs to track active time. We have seen some bypasses using a rotating fan attached to a mouse etc.

What if we could automatically send some keyboard inputs to the computer & we do not need to create any script or install any additional software? Yup, that's right, we will be leveraging simple usb keyboard technology with a tiny micro-controller.

🧑🏻‍💻 Automatic Coding Keyboard

This works a standard USB keyboard but with a magical twist. You can connect this to your wifi > then provide a public website link (typically github raw link of any code) > it writes the code on your behalf while you enjoy your free time.

📽️ Demo

You can click on the below Image or this Youtube Link to see the demo. Please let me know in the comments, how do you feel about this App.

𓏠 Hardware requirement

  1. ESP32-S3-super-mini or Standard ESP32-S3 or any variant of ESP32-S3
  2. A type-c USB cable or a micro-usb cable depending on your ESP model.

🧩 Steps

  • Go to this web flasher using any Chromium based browser like Chrome, Edge, Brave etc on you computer.

  • Connect your ESP32-S3 with a USB cable. If you don't see your serial device, you can press & hold Boot button on ESP32, then press the Reset button and release both. Try to connect again.

  • After successful conenction, just press the Flash button from the web.

  • Once flashing is successful you can remove the USB cable & use the automatic keyboard anywhere.

  • If it is turned on & it is not configured to connect to any WiFi, it will be in HotSpot mode > then connect to the WiFi name ESP32-AutoKB from any device (password: 12345678) > type in http://192.168.4.1 from your device to control the keyboard.

  • You can simply turn on the automatic keyboard without the need to connect to any WiFi, it will act as a simple-automatic-keyboard .

  • You can provide your WiFi credentials, once that is set, you can restart (unplug & plug) ESP32. It should connect to your WiFi.

  • Grab the IP for the ESP32 (from router login or serial console) > type in http://<your-ip> in any browser from the same network > You will get a text box to input any public URL, you may enter anything.

  • Start the Auto Mode & it will start typing the html/raw code of that website in your notepad / IDE.

Using Ardunio IDE (Manual)

  • Install ESP32 on Arduino IDE. You can follow this simple guide .

  • Select your ESP32-S3 board in Tools > Board . Generally is should be ESP32S3 Dev Module .

  • Copy our auto-coder-keyboard in your Arduino IDE .

  • Press the upload button to push the code on ESP32.

  • You need upload the data-folder on ESP32.

  • After a successful flashing, you can configure & use as per above steps mentioned after flashing in web-flasher .

⌨ Sipmple Automatic USB Keyboard

ESP32-S3 natively supports USB OTG and it is perfect for this project. It will act as a USB keyboard which can send automatic inputs from a-z every 3 seconds (configurable in code).

📽️ Demo

You can click on the below Image or this Youtube Link to see the demo. Please let me know in the comments, how do you feel about this App.

𓏠 Hardware requirement

  1. ESP32-S3-super-mini or Standard ESP32-S3 or any variant of ESP32-S3
  2. A type-c USB cable or a micro-usb cable depending on your ESP model.

🧩 Steps

Using the web flasher (Easy)

  • Go to this web flasher using any Chromium based browser like Chrome, Edge, Brave etc on you computer.

  • Connect your ESP32-S3 with a USB cable. If you don't see your serial device, you can press & hold Boot button on ESP32, then press the Reset button and release both. Try to connect again.

  • After successful conenction, just press the Flash button from the web.

  • Once flashing is successful you can remove the USB cable & use the automatic keyboard anywhere.

Using Ardunio IDE (Manual)

  • Install ESP32 on Arduino IDE. You can follow this simple guide .

  • Select your ESP32-S3 board in Tools > Board . Generally is should be ESP32S3 Dev Module .

  • Copy our auto-keyboard-code in your Arduino IDE .

  • Simply press the Upload button and relax.

  • After a successful flashing, it becomes your USB keyoard which sends automatic inputs. You can use this with any device, even a mobile phone.

You can buy me a coffee via this link or tap on below image. Thank you 🙏.